Magnetic Filters, industrial, double-walled
With the double-walled filter a hot liquid can flow through the outer chamber, to prevent congealing of the product flowing through the inside (e.g. chocolate).
Standard industrial double-walled magnetic filters are available for pipe sizes from DN50 to DN150. The magnetic filter is fitted with flanges that meet the requirements of DIN 2576 PN10. The housing is suitable for the food industry.
Cleaning: Once the product flow has been stopped, the entire magnet unit must be removed from the product chute. Then the magnetic bars can be pulled out of the extractor tubes, causing the Fe particles to fall off of the extractor tubes.
| Application |
Little Fe contamination. Powders and fluids, for example in the plastics, ceramics, chemical and food industries |
| Design | Flat flanges Flat bottom Double-walled construction for liquids that tend to coagulate |
| Housing – internal – external |
– Completely stainless steel AISI316 – AISI304 + AISI316 |
| Finish | Grit blasted, Ra 3 µm |
| Operating pressure | 10 bar (testing pressure 15 bar) |
| Removal of Fe particles from |
30 µm – 1 mm |
| Cleaning | Manual or semi-automatic (with extractor) |
| Magnet system | Bar magnets Ø25 evenly distributed over a removable unit |
| Magnet quality |
Neodymium GSN-42SH, Br. 13 200 Gauss, Tmax 150°C |
| Magnet field strength (±10%) | 8000 Gauss on extractor tube |
| Temperature |
Max. 140°C continuous |
| Inlet/outlet: | Flange Ø50 – Ø100 mm |
| Overall length | 230 to 360 mm |
Available standard articles:
- SSFD005038 Double walled – Connection DN50 – H300mm – 5 magnet bars Ø25/23mm N42SH
- SSFD006538 Double walled – Connection DN65 – H300mm – 5 magnet bars Ø25/23mm N42SH
- SSFD008038 Double walled – Connection DN80 – H360mm – 7 magnet bars Ø25/23mm N42SH
- SSFD010038 Double walled – Connection DN100 – H360mm – 7 magnet bars Ø25/23mm N42SH